Home Decorators Collection CONNOR 71847 Guide D'utilisation Et D'entretien page 13

Assembly - Attaching the Fan without the Light Kit
1
Assembling the fan without the light kit
□
In order to use the fan without the light kit, remove the switch
cap (WW) from the top of the light kit fitter assembly (F) by
removing the center hex nut (NN) inside the switch cap (WW),
and then thread the switch cap (WW) off the threaded nipple
on the top of the light kit fitter assembly (F).
□
Press the plastic plug (PP) (provided) into the center hole of
the switch cap (WW).
□
Remove and save the three light kit mounting screws (HH) on
the switch cap (WW).
□
Slide the switch cap (WW) into the switch housing (XX) and
reinstall the three light kit mounting screws (HH).
HH
13
Please contact 1-800-986-3460 for further assistance.
NN
WW
F
E
XX
WW
PP
HOMEDEPOT.CA