Publicité
All manuals and user guides at all-guides.com
- On MAC, go to System Preferences>Sound>Output and choose "USB
Headphone set".
- On PC, go to Control Panel>Hardware and Sound>Sound>Manage Audio
Devices>Playback and choose "USB Headphone Set".
2 Position power switch :
- In the right position, the unit is ON and the LED will illuminate Red.
- In the left position, the unit is OFF and the LED will be off.
LED indicator :
Red is ON, Flashing Red is Charging, Flashing Blue/Red is Need to Charge
Switch
ON
Switch
OFF
USB in
The iP1 will charge and the
LED will illuminate Red. The
iP1 will play the sounds from
your connected computer
(Mac or PC) and will bypass
your computer's speakers.
The iP1 will charge and the
LED will flash Red while it is
charging and will illuminate
constant Red when the unit is
fully charged.
3,5mm Jack in
The iP1 will only play the
audio from the source that it is
connected to it via the 3.5mm
cable and no recharging will
occur. The LED will illuminate
Red until the battery is low
when it will flash Red/Blue
The LED is not illuminated and
no sound will be generated.
Publicité
