Publicité
IR REMOTE CONTROLLER
1
2
3
4
5
BUTTON
FONCTION
Automatic mode will enable you to run the automatic programs on the product. Press
1
AUTO
remote controller, display shows "CC10". Press
of programm. Press
to turn off the auto mode.
2
BLACK OUT
Press
off existing mode. Press
Strobe effect for automatic mode, sound control and preset colors. Press
STROBE
3
controller. Press
again, it's 25% speed, press the 2
it's 75% speed, press the 4
th
% mode will enable you to run the color pulse programs on the product. Press
4
%
controller, display shows "CC15". Press
gram. Press
to turn off the color pulse mode.
0-9 kinds Static color mode, press one time for your wanted color, press
0-9
5
increase or decrease brightness.
6
SPEED
No function
Sound-Active mode will enable the product to respond to the music. Press
7
SOUND
controller. Press
and then press
Press
return the last modes.
To adjust sound sensitivity for in Sound-Active mode, press
8
SENSITIVITY
press
or
to either increase or decrease the sound sensitivity.
It is a color gradient mode. Press
9
FADE
Fade mode. Press
or
to either increase or decrease the speed of the program.
10
MANUAL
Press
one time, the menu display show "dIon", turn on the remote controller. Press
to choose your Wanted colour. Press the 1
40% birghtness, press the 5
th
which you chosen.
6
7
8
9
10
or
to either increase or decrease the speed
return the last modes.
on the remote
time, it's 50% speed, press the 3
nd
time, it's 100% speed. Press
again to turn off the strobe function.
or
to either increase or decrease the speed of pro-
or
on the remote
or
to either increase or decrease the sound sensitivity.
on the remote controller and then
on the remote controller, then Press
again to turn off the
time, it is 20% brigtness, press the 2
st
time, it is 100% bightness, press the 6
time, turn off the manual color
th
P.22
WIRELESS DMX
This ALGAM LIGHTING fixture is equipped with a DMX wireless transmission system. "WIRELESS DMX".
PAIRING YOUR DMX FIXTURE
1 • Connect the transmitter (Algam Lighting DMX-WT) to your DMX controller OUTPUT or turn ON the
EVENTPAR412 HEX IP set up as transmitter.
2 • Power up transmitter and the EVENTPAR412 HEX IP receiver.
3 • Press the pairing button on the EVENTPAR412 HEX IP' s WIRELESS DMX receiver
for 4 seconds, and the LED
4
the LED
turns white, indicating that your receiver is waiting to be paired.
3
4 • Press now on transmitter button to start pairing. Both receiver and transmit-
ter will blink rapidly (transmitter in blue color and receiver in green color). The
pairing is processing. Once pairing is done, the transmitter status LED is now
fixed blue color and receiver status LED is fixed green color.
If Transmitter or receiver looses DMX signal, the status LED will blink slowly.
ADD A FIXTURE IN AN ACTIVE GROUP
1 • Press and hold 3 seconds on receiver button on your new fixture to reset the
pairing until the status LED becomes white.(this means that receiver is now
ready to be paired).
2 • Press now on transmitter button to start pairing. Both receiver and transmit-
ter will blink rapidly (transmitter in blue color and receiver in green color). The
pairing is processing. Once paring is done, the transmitter status LED is now
fixed blue color and receiver status LED is fixed green color. The other fixtures
already paired in this group with this transmitter remain paired of course.
on the
SET UP A NEW GROUP
To set up a new group is very easy. You need one more transmitter of course. Keep the existing groups active , and start
the procedure above called « Pairing you DMX fixture».
time,
rd
NOTES
on the remote
This DMX wireless system from Algam Lighting is not limited in number of groups and in number of fixtures connected in
a group.
to either
DMX PROTOCOL
6 CHANNEL
CHANNEL VALUE
CH1
R dimming
CH2
G dimming
CH3
B dimming
time, it is
nd
CH4
W dimming
CH5
A dimming
CH6
UV dimming
will flash blue. When you release the button,
3
FUNCTION
Red dimming - From dark to bright
Green dimming - From dark to bright
Blue dimming - From dark to bright
White dimming - From dark to bright
Amber dimming - From dark to bright
Purple dimming - From dark to bright
P.23
!
The EVENTPAR412 HEX IP fix-
ture is automatically set as
«Receiver» if the fixture is set
in DMX mode and if no DMX si-
gnal is received by the connec-
tor «DMX IN».
The EVENTPAR412 HEX IP-
fixture is automatically set as
«Transmitter» if it receives a
DMX signal on its input «DMX
IN» or if it is set up in : CL, CC,
DE and CP mode.
Publicité
