Télécharger Imprimer la page
Fortin EVO ONE Schéma D'installation
Fortin EVO ONE Schéma D'installation

Fortin EVO ONE Schéma D'installation

Installation thar-vw1 et tb-vw pour volkswagen jetta 2015-2017
Masquer les pouces Voir aussi pour EVO ONE:

Publicité

Liens rapides

ONE
THAR-VW1 & TB-VW INSTALLATION
INSTALLATION THAR-VW1 ET TB-VW
PUSH
START
VEHICLE
VEHICULES
VOLKSWAGEN
Jetta
Push-to-Start
HARDWARE VERSION
VERSION MATÉRIELLE
NOTES
The vehicles OEM remote will remain
functional when the vehicle is running,
**
however, the intelligent access key will not
unlock the doors when the vehicle is running.
Parts required (Not included)
1x TB-VW
1x THAR-VW1
1x 1 AMP Diode
1x Diode (manual transmission)
MANDATORY INSTALL | INSTALLATION OBLIGATOIRE
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
* HOOD
MUST BE INSTALLED IF THE VEHICLE CAN BE
PIN
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
CONTACT
STATUT DE CAPOT : LE CONTACT DE CAPOT (INCLUS), DOIT ÊTRE
DE CAPOT
INSTALLÉ SI LE VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE
CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.
1 / 11
Page
PUSH
START
Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule sup-
YEARS
ANNÉES
2015-2017
REMOTE STARTER
FIRMWARE VERSION
VERSION LOGICIELLE DU
DÉMARREUR À DISTANCE
[
]
3
1.
20
MINIMUM
MINIMUM
A11
REV.: 20241115
portées dans ce diagramme (fonctionnelles si équipé)
PUSH
START
To add the firmware version and the options, use the
BYPASS
FIRMWARE VERSION
FLASH LINK UPDATER or FLASH LINK MOBILE tool,
[
]
75.
36
MINIMUM
La télécommande d'origine du véhicule sera fonctionnelle pendant que
le véhicule est en marche, toutefois, le déverrouillage des portes par la
clé d'accès Intelligente ne sera pas fonctionnel.
Pièce(s) requise(s) (Non incluse(s))
1x TB-VW
1x THAR-VW1
1x 1 AMP Diode
1x Diode (transmission manuelle)
Notice: the installation of safety
elements are mandatory. The hood pin
SECURITY STICKER
OFF
and the sticker are essential security
NON
elements and must be installed.
AUTOCOLLANT DE
Notice: l'installation des éléments de
SÉCURITÉ
sécurité est obligatoire. Le contact de
WARNING
capot et l'autocollant de sécurité sont
ATTENTION
des éléments de sécurité essentiels et
Included
doivent absolument être installés.
Inclus
GUIDE # 70121
ADDENDUM - SUGGESTED WIRING CONFIGURATION
ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ
sold separately.
Pour ajouter la version logicielle et les options,
utilisez l'outil FLASH LINK UPDATER
ou FLASH LINK MOBILE, vendu séparément.
THIS MODULE MUST BE INSTALLED BY A
QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT
DAMAGE TO THE VEHICLE.
CE MODULE DOIT ÊTRE INSTALLÉ PAR
UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS
PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.

Publicité

loading

Sommaire des Matières pour Fortin EVO ONE

  • Page 1 1 / 11 REV.: 20241115 GUIDE # 70121 Page THAR-VW1 & TB-VW INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION PUSH INSTALLATION THAR-VW1 ET TB-VW ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ PUSH START START Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule sup- portées dans ce diagramme (fonctionnelles si équipé) PUSH PUSH...
  • Page 2 This guide may change without notice. See www.fortin.ca for latest version. 2 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. NOTES UNIT OPTION DESCRIPTION OPTION UNITE OEM Remote status (Lock/Unlock)
  • Page 3 This guide may change without notice. See www.fortin.ca for latest version. 3 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. DESCRIPTION | DESCRIPTION ATTENTION Pull the clips to release the cover Pull the clips to release the cover of the connector.
  • Page 4 This guide may change without notice. See www.fortin.ca for latest version. 4 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. AUTOMATIC TRANSMISSION WIRING CONNECTION | SCHÉMA DE BRANCHEMENT TRANSMISSION AUTOMATIQUE Yellow...
  • Page 5 This guide may change without notice. See www.fortin.ca for latest version. 5 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. MANUAL TRANSMISSION WIRING CONNECTION | SCHÉMA DE BRANCHEMENT TRANSMISSION MANUELLE Yellow...
  • Page 6 This guide may change without notice. See www.fortin.ca for latest version. 6 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. NOTES Take out the battery from the Retirer la batterie de remote control.
  • Page 7 This guide may change without notice. See www.fortin.ca for latest version. 7 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. DCRYPTOR PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION AVEC DCRYPTOR Parts required (not included) Pièces requises (non incluses)
  • Page 8 This guide may change without notice. See www.fortin.ca for latest version. 8 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. KEY BYPASS PROGRAMMING PROCEDURE 2/3 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/3 Attendez, ne touchez Wait, do not touch the pas au véhicule ou au...
  • Page 9 DCRYPTOR COMPLETÉE : retournez au véhicule et 9 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. rebranchez le connecteur 6-pins (Connecteur principal) et après tous les connecteurs. KEY BYPASS PROGRAMMING PROCEDURE 3/3 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 3/3 Take out the remote control Retirer la télécommande de...
  • Page 10 This guide may change without notice. See www.fortin.ca for latest version. 10 / 11 Page Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Insert REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE...
  • Page 11 The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way.