Publicité
English
4 - 5 : Power supply section
1 - Mains plug.
Please plug in your power cord to recharge the
battery and/or use your device.
2 - Fuse holder.
Please replace the fuse with an identical model
only. Fuse T2AL 250V.
3 - ON-OFF-CHARGE switch.
- In the ON position: The RACER80 Evo is
powered on.
- In the OFF position: The RACER80 Evo is off.
- In the CHARGE position: The RACER80 Evo
batteries are charging. The BATTERY CONNECT
switch must be in the ON position for charging to
take place.
4 - BATTERY CONNECT switch.
Disconnects the battery when the RACER80 Evo
is not used for a long time.
This saves the battery life.
The switch is set to OFF on delivery.
5 - Battery level indicators.
It is imperative to charge the battery when only
the LOW light is on.
The CHARGE indicator of the battery lights up
green when the battery is charged.
Precautions for using the integrated battery
1 - This device is equipped with a DC22.2 V 2200 mA Li-ion battery for an average autonomy of 5 hours depending
on the type of use.
2 - The battery take about 8 hours to fully charge.
3 - A charge management system is built into the device and tells you when a recharge is needed.
4 - If, however, the battery level is low and only the «LOW» indicator is lit, connect your device to the mains or
replace the batteries with charged ones.
5 - The used battery must be disposed of in the appropriate waste disposal system. Do not dispose of in the
environment.
6 - To conserve battery power, always turn the unit completely off and set the BATTERY CONNECT switch
to the OFF position when not in use.
7 - Battery must be charged regularly to prevent them from drying out and becoming completely unusable.
We recommend charging the battery at least once every three months.
8 - The battery in this unit is considered wear parts and is not covered by the warranty.
Page 8
80W
RACER80 evo -
portable sound system With bluetooth
-
®
tWs
multimedia player and optional uhf microphones
5
1
2
3
4
Publicité
