Publicité
English
3.5
(See Fig. B).
WARNING: Failure to follow the correct procedure when
charging batteries will result in permanent damage.
a. Plug the charger plug into the appropriate outlet. The
b. Slide a battery (1) onto the battery charger (4).
c. Once charging commences, the red LED (5) will illumi-
d. When the battery is fully charged, the green LED (6) will
Note: Make sure the battery and battery charger are lined up
correctly. If the battery does not slide onto the battery
charger easily, don't force it. Instead, remove the battery;
check the top of battery and the battery charger slot are
clean and undamaged and that the contacts are not bent.
3.6
The battery has a built-in charge indicator. Pressing on the
button (3) will indicate the charge level. The right LED indi-
cates a high charge level and the left a low charge level that
will mean the battery pack will require charging soon.
IMPORTANT: When a low charge level is indicated be aware
the tool may stop operating while using the tool. In some
instances this may be dangerous. It is recommended to
always ensure the battery pack has a good charge level.
12
64769&7063688&7063910&7063911-18V-charger-MA-2404-30.indb 12
64769&7063688&7063910&7063911-18V-charger-MA-2404-30.indb 12
Charging the Battery
red LED indicator (5) on the charger (4) will lighten up.
nate and the green LED (6) will flash.
illuminate.
Battery Charge Level
06/05/2024 13:5
06/05/2024 13:5
Publicité
