Technical Data; Assembly - Force 59595091 Guide De L'utilisateur

TECHNICAL DATA

Product code
Model number
Engine
Displacement
Electric start
Tank capacity
Speed
Chute rotation angle
Working width
Working height
Pneumatic tires
Self-propelled
Auger clutch
H eat handle
Halogen light

ASSEMBLY

WARNiNG! Always ensure that the tool is switched off and the plug
is removed from the power source before making any adjustments or
performing maintenance procedures.
Read and follow the assembly and adjustment instructions for your
snow thrower. All fasteners are in the parts bag. Do not discard any
parts or material until the unit is assembled.
WARNiNG: Before doing any assembly or maintenance to the snow
thrower, remove the wire from the spark plug.
NOTE: Torque is measured in foot pounds (metric N.m.). This
measurement describes how tight a nut or bolt must be. The torque is
measured with a torque wrench.
Tools Required
1. Knife
2. Pliers
3. 3/8", 7/16", 1/2" and 9/16" open end wrenches
4. Tire gauge
Remove the snow thrower from the carton (Fig. 4)
1. The snow thrower is shown in the shipping position.
2. Remove packing material from wheels, handle, and auger housing.
3. Locate and remove the parts bag.
4. Cut open the end of the carton next to the handle.
59595091
STG2870
340-2A
338CC
120V
5.3L
6 forward and 2 reverse
190º
28" ( 711
22" (559mm)
13" x 5.00" – 6
Yes
Yes
Y es
30 W
9
mm)