Publicité
F4
G4
A4
B4
C5
D5
L
M
FUNCTIONS
K TRANSPOSE ON/OFF
L CHANSONS
M METRONOME ON/OFF
N METRONOME BEAT
O TAP
P TEMPO
Q TEMPO VALUE
R REVERB
S REVERB LEVEL
T LOCAL CONTROL
U GUIDE
E5
F5
G5
A5
B5
C6
N
O
P
NOTE
Change the pitch of the entire keyboard up to one octave in half-steps.
A3/B3
Press A3 and B3 simultaneously to reset the default transposition setting.
C4 TO
Start/stop playback of songs (1 to 10).
A#4
C5
Activate or deactivate the metronome.
C#5 TO
Set the metronome beat. For example, selecting 0 means no accent will be
F#5
marked. Selecting 2 means you will get an accent every two beat.
G5
Press this key at a steady pace to set the tempo.
Increase or decrease the tempo value by increments of 1. In Function mode,
A5/B5
press A5 and B5 simultaneously to reset the default tempo.
If you wish to enter a value lower than 100, please press 0 first, then enter a
C6 TO A6
two-digit number. The minimum value is 5, and the maximum is 320.
C7
Enable or disable reverb. (Default: On).
Adjust the reverb level up or down.
D7/E7
Press D7 and E7 simultaneously to reset the reverb level to default.
Enable or disable Local Control function.
Enabled: This instrument will operate independently as a master keyboard.
G7
Disabled: This instrument will be controlled by a connected device.
It will not produce sound when played but will send MIDI messages.
Note: Local Control function is enabled by default.
Activate or not the key beep when the function keys are pressed. (default :
C8
disabled)
D6
E6
F6
G6
A6
B6
Q
P.21
C7
D7
E7
F7
G7
A7
R
S
T
B7
C8
U
Publicité
