FONCTIONS GÉNÉRIQUES
LAYER MODE
With this feature, each key pressed produces two distinct sounds simultaneously. When you play a note or chord, you
will hear that note or chord played by both selected sounds.
Press and hold one of the SOUND buttons
tion. The corresponding LEDs of the selected sounds will light up.
To deactivate the LAYER mode, press one of the three other inactive SOUND buttons
lected, and its corresponding LED will light up.
SPLIT MODE
The SPLIT mode divides the keyboard into two halves, allowing you to choose a different sound
for each half.
Press and hold two SOUND
as the split point. The corresponding LEDs of the selected sounds will light up after releasing the
buttons.
To deactivate the SPLIT mode, press one of the three other inactive SOUND
sound will be selected, and its corresponding LED will light up.
Note: If you press multiple keys while setting the split point, the last key pressed will be set as the
split point.
The LAYER and SPLIT functions cannot be used simultaneously.
DUAL KEYBOARD MODE
The DUAL KEYBOARD mode divides the keyboard into two similar
halves to facilitate learning with a teacher and four hands playing.
ACTIVATING OR DEACTIVATING DUAL KEYBOARD MODE
Press the DUAL KEYBOARD
keyboard, simultaneously press the first three keys (A0, A#0, and B0
of the first octave
), then press the C#3 key of the third octave
A
(DUAL KEYBOARD OCT)
B
The split point is located between the E4 and F4
SELECTING A SOUND FOR DUAL KEYBOARD
The active sound before selecting DUAL KEYBOARD mode will become the default sound for both zones. To change
the sound, simply select a new one once DUAL KEYBOARD mode is active.
The DUAL KEYBOARD function cannot be used simultaneously with the LAYER function, the SPLIT function, or during song
playback.
, then press a second SOUND button
11
11
buttons simultaneously, then press a key on the keyboard to set it
14
button on the control panel, or on the
.
C
.
P.18
to activate the LAYER func-
11
11
. The new sound will be se-
buttons. The new
11
A
B
C