Publicité
Power on the System / Schalten Sie das System ein / Mise sous tension du système
/ Encienda el sistema / Ligue o sistema / Het systeem inschakelen / Accensione del
sistema / Włączanie systemu / Zapnutí systému / Slå på systemet / Pornire sistem
/ Включване на системата / Tænd for systemet / Ρεύμα στο σύστημα / Süsteemi
sisselülitamine / Kytke järjestelmän virta päälle / Napajanje sustava / Rendszer áram
alá helyezése / Įjungti sistemą / Ieslēdziet sistēmu / Zapnite system / Vklopite sistem /
Vklopite sistem / Güç açma / Ligar o Sistema
Step 1:
Turn on the AC breaker between the inverter and the public grid.
Step 2: Turn on the AC breaker between the inverter and the EPS loads.
Step 3:
Turn on the DC switch between the PV string and the inverter. (if any)
Step 4: Turn on the DC switch between the battery and the inverter.
Step 5:
Turn on the DC switch at the left side of the inverter.
Step 6: If the battery is connected, but PV and Grid are not connected. Press and hold
the battery button until the screen is on. If PV or Grid is connected, skip this step.
75
Publicité
