Publicité
EN
English
that it will not drape over the counter top or table top, where it can be pulled
on by children or tripped over.
USING THE PRODUCT FOR THE FIRST TIME
1. Remove the packaging material and remove any stickers.
2. Make sure that the filter is installed in the kettle.
3. When using the product for the first time, clean it as described in the
"Cleaning and maintenance" paragraph.
4. Connect the power base to a socket.
5. Fill the kettle with cold tap water up to the maximum level "MAX". Boil the
water and discard it. Repeat this operation two or three times.
6. Now the kettle is ready for use.
USING THE PRODUCT
NEVER plug the kettle in when it is empty.
DO NOT use the appliance for purposes other than boiling water.
Other liquids may contaminate the inside of the kettle.
DO NOT fill the kettle when it is on its power base already plugged in.
DO NOT fill the kettle beyond the MAX level indicated on it. Overfilling
may cause water to spill out when it boils.
DO NOT attempt to connect other appliances to the power base or
tamper with the connector in any way.
1. Place the power base on a flat, dry and heat-resistant surface.
2. Open the lid by pressing the lid release button and fill with water up to the
minimum level "MIN" (0.75 L).
3. Close the cover.
4. Place the kettle on its base and make sure that it is securely hooked in
place.
5. Plug the power base into a socket.
6. Direct the kettle spout away from furniture, walls, etc., to prevent damage
from steam.
7. Press the power button "I" on the lid: the white indicator light, which can
be seen through the water level window, will light up. This light indicates
18
Publicité
