Publicité
5. TECHNICAL SPECIFICATION
Model
7518.0140
7518.0145
6. CLEAN, REPAIR AND MAINTENANCE
WARNNING: DISCONNECT THE APPLIANCE BY SETTING THE DISCONNECTION DEVICE IN THE FIXED WIRING IN
OFF POSITION BEFORE CLEANING OR MAINTENANCE
THE APPLIANCE SHOULD NOT BE CLEANED WITH A WATER JET AND DO NOT IMMERSE THE APPLIANCE OR PART
OF THE APPLIANCE IN WATER FOR CLEANING
1. CLEAN
After use for each time, please clean it with soft dry fabric, avoid using sharp metal, and strictly prohibit cleaning
with water. The remaining oil of the box in the bottom should be cleaned out after each use.
2. MAINTENANCE
The thermal protective device will operate and cut off the heating elements when the temperature is too high
while using. Please check the machine after the power is cut off and the oil is cooled down to room temperature.
Then open the cover of the reset button behind the machine and press the reset button to restart the machine.
3. RESET
The temperature limiter will be cut off the power automatically once the thermostat was out of control. MUST
cool down the machine first! User only need to remove the black cap of RESET button and press the black inner
button, the machine will be worked again.
7. CIRCUIT DIAGRAM
Specification
Smooth
220-240V
ribbed
220-240V
www.combisteel.com
Voltage
Power
2kW
2kW
Dimensions
360x450x220mm
360x450x220mm
5
Publicité
