Publicité
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
3. INSTALLATION
WARNING: THE INSTALLATION SHOULD BE PERFORMED BY AUTHORIZED PROFESSIONAL ONLY AND AN ALL
POLES DISCONNECTION DEVICE MUST BE INCORPORATED IN THE FIXED WIRING IN ACCORDANCE WITH THE
NATIONAL WIRING RULES
1. Before installing the appliance for the first time, remove all packing and foreign materials from the appliance
and dispose packaging material safely according to local regulation. Any material of this sort left in the
appliance may melt and/or burn when the appliance are used.
2. Check for visible damage of the appliance and the power cord. Do not use the appliance any more if you
find the power cord or some parts of this product are damaged.
3. Check the supply voltage from the fixed wiring matches the value indicated on the appliance. Do not connect
the appliance to the fixed wiring when the voltage does not match the rated value indicated on the appliance
4. Place the appliance in a location with superior ventilation system and far away from tinder and explosive
object, and place the appliance on a smooth horizontal and stable surface, and Keep good heat dissipation
— When operating the appliance, keep at least 50mm space on all side of the appliance to allow adequate
air circulation.
5. Connect the appliance to the fixed wiring in accordance with the national wiring rules and connection
diagram in the appliance
4. OPERATING INSTRUCTION
Before use, please check whether the voltage of power supply is in conformity with that in the value indicated
on the marking plate.
Operating steps:
1. Switching on the appliance by connecting the disconnection device in the fixed wiring, and then the
indication light is on green to indicate the appliance is in STAND BY mode. Adjust the working temperature
to the required one, now working light is on yellow, the heating plate is working. After tested, the user can
re-adjust the thermostat knob, select the required temperature for working again.
2. When the temperature reaches the setting one, the yellow light will turn off, then it will turn into the
thermostat state, the user can start to work. When the temperature comes down, the thermostat will start
working again automatically. This process is cycling repeatedly, guarantee the temperature is on the set up
scope.
3. When the food is ok, the user can eat it after take out by the chopsticks, avoid to use metal to roll up or take
out the food, otherwise it will hurt the surface of the heating plate.
4. The box of bottom can be collected the remaining oil of the heating plate expediently, it should be cleaned
out frequently to avoid coming out.
www.combisteel.com
4
Publicité
