Publicité
Operation
Temperature setting and control (CAREL)
The front panel of the thermostat
1.
Machine On/Stand-by (keep pushed)
2.
Programming key (service agent only)
3.
Manual defrost (keep pushed)
4.
Defrosting light
5.
Compressor operation light
How to turn the machine in ON / STAND -BY status
•
Press and hold the
How to unlock the keyboard (»Loc» message)
•
Push
button for more than 3s, «PS» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 60s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point
•
Push and immediately release the
•
To change the set value push
•
To memorize the new set point value push the
Automatic defrost
•
The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual defrost:
•
Press and hold the
•
The defrost cycle will start immediately and the Defrost
Note: Starting a manual defrost also resets the automatic defrost timer.
P2M065STD-Ver1.1
key for 3s, the machine will turn from ON to STAND -BY status and vice-versa.
key, the set point will be showed and starts blinking;
or
arrows within 20s.
and
button for 3s;
10
key again or wait 20s.
LED illuminates.
GB
Publicité
