Publicité
Operation
Temperature Setting and Control (Dixell)
•
The front panel of the thermostat display:
How to see the set point
• Push and immediately release the SET key, the set point will be showed.
• Push and immediately release the SET key or wait about 15s to return to normal visualisation.
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value.
• The value of the set point will be displayed and the "°C" starts blinking.
• To change the set value push the "
• To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual defrost:
• Press and hold the defrost
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
P2M065STD-Ver1.1
1. Defrost indicator
2. Compressor operation indicator
3. SET key
4. Temperature modification keys
5. Defrost
" (up) or " " (down) arrows within 15s.
button for 5 seconds.
8
button
GB
Publicité
