Publicité
EN
Empty the dust bag frequently to ensure maximum
dust collecting efficiency.
·Adjust variable speed knob for different speed
requirements.
·When continuous operation is required, first depress
the switch and then the lock-on button and release to
disengage lock, squeeze and release switch.
Replacing Carbon Brushes
·Use a screwdriver to remove the brush holder cap.
·Take out the worn carbon brush, insert the new one and secure the secure the brush hold cap.
Warning! Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
Accessories
The performance of your tool depends on the accessory used. Accessories are engineered to high quality standards and designed to enhance the
performance of your tool. By using these accessories you will get the very best from your tool.
Maintenance
Your tool has been designed to operate over a long period of with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care
and regular cleaning.
Warning! Before performing any maintenance, switch off and unplug the tool.
·Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
·Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
Environmental protection
The appliance and accessories should be recycled in an environmentally friendly way. Do not
dispose of the appliance with household waste, as unsorted municipal waste. Use instead
separate collection facilities. Support environmental protection by taking the appliance to a
local collection point or obtain information from a specialist retailer. Contact you local
government for information regarding the collection systems available. If electrical appliances
are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and well-being. When replacing old appliances
with new ones, the retailer is obligated to take back your old appliance for disposal.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
4
WWW.NIKOLAOUTOOLS.GR
Fig. 3
Publicité
