Publicité
TROUBLESHOOTING
You can solve many common problems quickly, saving you the cost of a possible service call. Try the suggestions
below before calling the service technician.
The appliance is not running.
•
The appliance is not plugged in.
•
The appliance is not turned on.
•
The voltage of the installation is not correct.
•
The circuit breaker or fuse may have blown.
The appliance is not cold enough.
•
Check the temperature control setting.
•
Check if the ambient temperature is beyond the
appliance's operating temperature.
•
The door is open too frequently.
•
The door is not closed correctly.
•
The door is not sealing correctly.
•
There is insufficient free space around the
appliance.
The compressor starts and stops frequently.
•
The external temperature is high.
•
A large number of bottles are stored in the cellar.
•
The door is open too frequently.
•
The door is not closed correctly.
•
The appliance has not been correctly set.
LED lights do not operate.
•
The appliance is not plugged in.
•
The fuse has blown.
•
LED lights are broken.
•
The light switch is off.
37
The device emits vibrations.
•
The appliance is not leveled.
The appliance makes too much noise.
•
The rattling noise may come from the flow of
refrigerant, which is normal.
•
Water can be heard circulating at the end of a
cooling cycle.
•
Expansion and contraction of the internal walls
may cause a cracking sound.
•
The appliance is not leveled.
•
Check if the fan is in good condition.
The door does not close properly.
•
The appliance is not leveled.
•
The door seal is dirty or damaged.
•
The shelves are not positioned correctly.
•
A part of the contents is preventing the door from
closing.
37
Publicité
