OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is between 61º F and
100º F (16º C and 38º C). Ambient temperatures above or below the recommended temperatures may affect
the performance of the unit. For example, placing your appliance in extremely cold or hot conditions may cause
interior temperatures to fluctuate. The appliance may not be able to reach the desired temperature range of 41º F
to 65º F (5º to 18º C).
ZONE 1 LEFT
ZONE 2 RIGHT
CONTROL PANEL
•
Press and hold
turned off, it stops working and shuts down.
LIGHT SETTING
•
The default light setting turns the light on automatically when the door is opened and turns the light off
when the door is closed. The LCD screen will show
•
Press and hold
for three seconds to keep the light turned on at all times. The LCD screen will show
in this mode.
TEMPERATURE SETTING
•
Press the
or
•
Press both the
and
to Fahrenheit or from Fahrenheit to Celsius
WARNING SYSTEM
•
When the door is open for longer than 5 minutes, the alarm will beep three times every five seconds, and the
LCD screen will display
•
When the temperature inside the appliance is below 35.6ºF (2ºC) for over 3 hours, the alarm sounds and the
LCD screen displays
•
When the temperature inside the appliance is above 77.ºF (25ºC) for over 6 hours, the alarm sounds and the
LCD screen displays
Temperature Ranges
41–65º F
38–65º F
on the control panel for two seconds to turn the cooler on or off. When the cooler is
to adjust the temperature up or down by 1ºF or 1ºC.
together and hold for 3 seconds to change the temperature display from Celsius
. Press any key or close the door to stop the alarm.
. Press any key to stop the alarm.
. Press any key to stop the alarm.
5–18º C
3–18º C
in the default mode.
33