Publicité
EN
of the power tool in situations where the power tool is not in use. unexpected.
•
Dress appropriately. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves
away from moving parts. Loose clothing, jewellery or long hair can get caught in moving
parts.
•
If devices are provided for the connection of dust extraction and collection systems, ensure
that they are connected and used correctly. The use of these devices can reduce dust-related
risks.
•
Do not let the familiarity gained from frequent tool use allow you to become complacent and
ignore the principles of tool safety. One careless action can cause serious injury in a fraction of
a second.
4. POWER ALSO USE AND CARE
•
No force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the speed for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the battery pack from the power tool be
fore making any adjustments, changing accessories or storing the power tool. These
preventive safety measures reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or power tools to operate them. instructions . Power tools are dangerous in the
hands of inexperienced users.
•
Perform maintenance on power tools. Check for misalignment or binding of moving parts,
breakage of parts or any other condition that may affect the power tool's operation. If
damaged, have it repaired before use. Many accidents are caused by poorly maintained
power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
•
Use the power tool, accessories and tool bits etc. in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations other than
those intended could result in a hazardous situation.
•
Keep handles and gripping surfaces dry, clean and free of oil and grease. Handles and gripping
surfaces 7 Slippery surfaces do not
5. BATTERY ALSO USE AND CARE
•
Recharge only with the charger specified by the manufacturer. A charger that is suitable for a
different type of battery pack.
•
Use power tools only with specifically designed batteries. Use of any other battery may create
a risk of injury and fire. Product information
•
When the battery is not in use, keep it away from other metal objects, such as paper clips,
coins, keys, nails, screws or other small metal objects, which can make a connection from one
terminal to another. A short circuit between battery terminals can cause burns.
•
Under abusive conditions, liquid may leak from the battery; avoid contact. In case of accidental
contact, flush with water. If liquid comes in contact with eyes, seek medical attention. Liquid
ejected from battery may cause irritation or burns.
•
Do not use damaged or modified batteries or tools. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk of injury.
21
ALTUNA AF28
Publicité
