Alesis SR-16 Manuel D'utilisation Du Propriétaire page 3

SR-16 Quick Setup (English)
3
Plug the AC adapter cord
12VDC
into the 9V AC jack and
the adapter into a wall
socket.
4
Turn on the
unit.
5
Tap the pads
to hear drum
sounds.
As you hook up the SR-16, the volume control on
your power amp and the SR-16 should be all the
way down, and power to both units should be off.
2
If you have a couple of
footswitches, plug
them into the
Start/Stop and
Count/A/B/Fill jacks.
1
Plug 1/4" mono
cords from the
main outputs to an
amplifier, mixer, or
stereo system.
3
6
Adjust
the volume.
V O L U M E