Publicité
VI. Internal Code Display
1.
Under weighing state, press [Set] and input [2] and [8] to enter the inner code displaying
state with inner code indicating light on; then re-press [Set] and input [2] and [8] to quit the
inner code displaying state with inner code indicating light off.
2.
Under inner code displaying state, keys except [Zero] and [Set] are invalid.
3.
20 internal codes are equal to a division value. For example, a scale with its n=3000, the
full capicity inner code is 60000.
VII. Save Data Record
1.
Vehicle no. of the indicator is 5-bit number and article no. is 3-bit number. 1000 vehicle
numbers and 201 article numbers can be saved.
2.
The record of a group of data will be printed out at after a complete set of data is saved
(relevant printing setting shall be valid).
3.
Three methods of data storage:
1)
Save weight for empty vehicle at first and then for full vehicle or save weight for full vehicle at first and
then for empty vehicle, i.e. a complete record is composed of two times' data saving.
2)
For weighing full vehicle with known tare weight, one time of data saving may form a complete record.
3)
For weighing just article, one time of data saving may form a complete record.
For recognizing and classifying three above situations, we make following agreement for
XK3190-DS3:
▲ The vehicle no. shall be a number within the range of 00001～99999, i.e. 00000 cannot be kept as
a real vehicle number. When being set as 00000, it means that the object being weighed is not a
vehicle with article but only a article.
▲ When [Tare] light is on, the tare is known and therefore one time data saving may constitute a
complete record.
▲ When vehicle no. is an any 5-bit number other than 00000, the highest bit of parameter Y in the
printing parameters is set as 0 and the tare light of indicator is not on, two times' saving may
constitute a complete record.
4. Saving Method:
(Table 3-1)
Step
Operation
1
Press [Print]
2
Input the vehicle no. by pressing number
keys
Press [Input]
3
Input the article no.
Press [Input]
4
Press [10]
Press [Input]
Data saving of indicator may adopt the way of vehicle number. or not. See detailed information in the
chapter printing settings. If setting as not using vehicle number, there will be no operations, steps or
printing contents about vehicle number. Similarly, data saving of indicator may adopt the way of
article number or not. See details in the chapter about printing settings.
▲ ! When data is unstable or when gross weight ≤0 or net weight≤0, data cannot be
saved.
5. About automatic save and printing:
1) See setting about automatic save and printing in the chapter about printing settings.
2) Automatic save and printing have no operation method of two times' saving.
3) The vehicle number and article number saved during the process of automatic saving are the vehicle number and
article number set before saving.
4) Tare weight during the process of automatic saving has following three detailed occasions,
(1)
When tare light is on, the current tare weight will be recorded in the group of data.
(2)
When tare light isn't bright, the indicator will automatically search for tare weight of the vehicle from its
memory and save this tare weight in current group of record.
(3)
When tare light isn't bright and there is no tare weight of the vehicle saved in memory, 0 will be judged
X K 3 1 9 0 –DS3
Displayed content
Under weighing displaying
(9)
Note
state
[ o *****]
Input the vehicle no.
[ o 03217]
E.g.: 03217
[hn
**]
Input the article no.
[hn
35]
E.g.: 35
[BFL **]
Input the percentage of discount
[BFL 10]
rate
E.g.: 10
Complete saving
Publicité
