Publicité
KPX
5.3. Measurement tests
NOTICE!
After completion of the installation, the function of the
equipotential bonding must be checked and document-
ed by measuring the resistance.
6. Operation
6.1. Drum lock
Due to the locking device, the winding and unwinding process of the cable can be
stopped after each revolution of the drum.
The locking device can be switched on and off by turning the locking screw
• With locking: Locking screw flush with the surface.
• Without locking: Locking screw screwed in (approx. 2 mm).
6.2. Free cable length (a)
The free cable length
6.3. Releasing the connection
ATTENTION!
• Do not disconnect the terminal clamp connection by
pulling the cable.
• If the equipotential bonding conductor is pulled out,
it must be returned by hand when it is automatically
wound up. Uncontrolled snapping back of the cable
causes injuries.
EFCO OPERATING INSTRUCTION
a
can be set by adjusting the cable stopper
.
3
.
5
15
Publicité
