Technical Installation; Parts - GardiPool Rectoo Notice De Montage

manual - RECTOO
_____
24
Draw the outline of the skimmer (2x) on
the lining.
_____
25
Fix the second skimmer seal ring on the
liner. See to it that the screw holes in
the seal ring match with these from the
skimmer. Now screw the finishing cap on
it (you can find the corresponding screws
in the skimmer box). Now cut out the part
of the liner from the skimmermouth. Then
click the covering plate on it. You must
now assemble and connect the coupling
with a tap via a hosepipe (see the technical
section: 2.4.3 Connection), to be able to
continue filling the pool.
_____
26
Insert the basket into the skimmer (2x),
and cover the skimmer with its lid.
The pool is now complete, except for the
technical part of the filter installation.
_____
70

2.4 Technical installation

2.4.1 Parts

Follow the instructions in the enclosed
filter installation manual.
The monobloc filter is the appliance that
takes care of the water treatment. Filter,
pump and 6-way valve are all grouped in
one appliance.
The pump capacity
Type Volume of water Flow rate
RECTOO 390x760 / H133
RECTOO 390x920 / H146
1. Filter valve
2. Inspection window
3. Pressure gauge
4. Suction pipe
5. Collector
6. Filter-pump connection pipe
7. Flange-filter attachment screw
8. Flange-filter attachment nut
9. Filter attachment flange
10. Filter body
11. Pump
12. Pump attachment screw + nut
13. Filter bleeding
14. Pedestal
15. Filter attachment screw
16. Sand packer
The most important parts of the filter unit
are: filter, pump, 6-way valve, lid, power
supply cable and connecting system.
The pump must never be placed higher
than 4m above the filter inlet and should
be placed in a dry space.
The pump must be serviced annually to
ensure optimal functioning.
KW
± 29 m 3 12 m³/h 0,55
± 39 m 12 m³/h 0,55
3
Ø sandfiltre option
elektr. box
550 mm 34003
code
550 mm 34003
code