GardiPool Rectoo Notice De Montage page 68

manual - RECTOO
RECTOO 390 x 920
13
4x30mm
The borders are supported by L-brackets. Distribute theses
equally around the circumference of the pool. Screw the
L -brackets into place 12mm from the top of the wooden
structure (stainless steel screws 4x30mm).
15
4x25mm EXO
tip: rough-bore the hardwood coverplanks.
rEmArk: clean the hardwood coverplanks before installation.
17
4.5x50mm EXO
68
4x25mm EXO
5x50mm
14
16
1.8x30mm
6x40mm
1.8x30mm
6x40mm
The profile is bolted to the pool via the 6 holes provided (Ø6x40mm).
Afterwards, the vertical profiles are covered with wood.
5x50mm
REMARK: Do not yet place the supporting plank there,
where the stainless steel internal steps will come
(see further on: installation of the stainless steel steps).
4x25mm EXO
2x1.8x30mm
2x4x16mm
4x1.8x30mm
4x1.8x30mm
2x1.8x30mm
6x4x40mm
4xM12x4
4.5x50mm EXO