Publicité
SELF-LEVELLING MODE
In this mode, the tool will level itself if it is within ±4° of horizontal.
FR
1. Place the self-levelling 360 ° line laser level on a flat, smooth surface that is within
±4° of horizontal.
ES
2. Turn the tool on by sliding the power switch to the up position. The self-levelling
360° line laser level will automatically level within 5 seconds. The LED indicator will
shine green.
PT
3. Press the mode button until the desired laser-projection mode is achieved and the
laser line is projected from the laser aperture.
IT
4. To turn o the laser lines, slide the switch to down position.
EL
Three LED indicate the battery fule gauge, green LED can provide 60% capacity,
orange LED can provide 30% capacity and the red LED only can provide 10% capacity
for using.
PL
UA
RO
EN
APPLICATIONS
Your self-levelling cross-line laser level can be hand-held for point marking and
simple alignment by sight . It is ideal for the following applications:
• Hanging pictures, photos, or artwork on walls
• Wallpapering and stencil work
• Framing doors and windows
• Installing electrical wiring and pipes
• Mounting wall fixtures, electrical outlets, switches and lighting
• Installing a drop ceiling
• Painting
• Installing closets
• Laying tile and flooring
ON
OFF
Publicité
