Publicité
Connecting your tppliitnce
No power up until installation process is complete
To connect your appliance to a three-phase power supply line 400VAC - 50 or 60Hz, your power line must
have 3 phases L1, L2, L3, a neutral conductor N and an earth conductor PE.
1 - Remove the
acrewa
the modulie to remove the protec-
tive cover :
(!) We recommend uaing tn H07RN-F-5G-2.5 power cord (conductor
croaa-aection 2.5mm²).
It ia eaaentitli thtt the power auppliy liine uaed ia protected by t 3-
phtae + Neutrtli 16A curve C circuit bretker.
3 - Connect the ctblie (not auppliied)
to the mtina termintli bliock ta foli-
liowa :
4 - Replitce the protective cover
before powering up :
Three-phase line connection
tt the retr of
18
Publicité
