Publicité
Connecting your tppliitnce
Connection to a single-phase line
No power up until installation process is complete
To connect your appliance to a single-phase 230VAC - 50 or 60Hz power supply, your power line must
have 1 phase L1, a neutral N and an earth PE.
1 - Remove the
acrewa
the modulie to remove the protec-
tive cover :
(!) We recommend uaing tn H07RN-F-3G-2.5 power cord (conductor
croaa-aection 2.5mm²).
It ia eaaentitli thtt the power auppliy liine uaed ia protected by t 1
phtae + Neutrtli 16A curve C circuit bretker.
3 - Connect the ctblie (not aup-
pliied) to the mtina termintli bliock
ta foliliowa :
4 - Before awitching on, replitce the
protective cover :
tt the retr of
17
Publicité
