Publicité
Section 1 - Product Overview
Power Cord
1
Power Socket
2
Status LED
3
Power / Reset Button
D-Link DSP-W320 User Manual
Hardware Overview
Connect your appliances, lamps, or other electronic devices you wish to control here.
Solid Red
Booting up after being plugged in or factory reset.
Blinking Red
Can't connect to Wi-Fi.
Blinking Amber
Ready for setup.
Successfully connected to the internet, bound to a mydlink account, and
Solid Green
socket switched on.
Blinking Green &
Firmware is currently being upgraded.
Red
Switched off. No power is supplied from the socket it's plugged into or it is
Off
unplugged.
Press this button to turn on/off the power socket. Press and hold for 5 seconds until
the Status LED turns solid red to factory reset it.
Power Buttons / Power Status LEDs
System Status LED / Reset Button
USB Power Socket
Smart Power Sockets
3
Publicité
