Publicité
ADJUSTING AND CHANGING
NOZZLES
WARNING:
personal injury, remove the battery
pack before adjusting or changing
nozzles.
The sprayer comes with four nozzles:
Adjustable nozzle, fan nozzle, shower
nozzle, and foaming nozzle. Change
the nozzle before you start working to
suit the task at hand.
Adjustable nozzle (Fig. 7a): Spot
spraying flower beds, walkways,
driveways, patios, and around trees
and shrubs. Edging along fences,
driveways, and walkways. Killing
brush.
Fan nozzle (Fig. 7c): Flat spray for
very broad coverage and higher
viscosity liquids. Preparing large areas
for planting.
Shower nozzle (Fig. 7c): Puts out
higher flow of water for watering and
treating plants.
Foaming nozzle (Fig. 7c): Visibly
marks treated weeds. Spot spraying
weeds in lawn, around flower beds,
trees, and shrubs. Edging along
fences, driveways, and walkways.
The adjustable nozzle can be adjusted between stream and spray (Fig. 7a).
1. Turn the knurled (textured) part of the nozzle counterclockwise for stream.
2. Turn the knurled (textured) part of the nozzle clockwise for spray.
Unscrew the whole nozzle counterclockwise to remove and change nozzle.
56-VOLT LITHIUM-ION CORDLESS BACKPACK SPRAYER — BSP3500/ BSP3500-FC
To prevent serious
7a
7b
7c
Stream
Spray
Adjustable Nozzle
Unscrew
Tighten
Fan Nozzle
Shower Nozzle
Foaming Nozzle
23
Publicité
