Enerwatt EWC24-2LI Mode D'emploi

EWC24-2LI / EWC36-2LI / EWC48-2LI / EWC60-2LI / EWC36-2 /
EWC48-2 / EWC60-2 / EWC72-2 / EWC12-10LIFE
Danger - to reduce the risk of re or electric shock, carefully follow these instructions
• The battery charger must only be used with the original rechargeable battery. Other types of battery
may cause injury to persons and property.
• The battery charger should only be used indoors and in dry locations.
• The socket-outlet should be located near the equipment and be easily accessible.
• The battery charger is not to be repaired or used if damaged or defective.
• If the battery charger is damaged or does not charge, please return the charger to the store where you
purchased it. Do not dispose of it in the household garbage.
• The battery charger is designed to be placed in a horizontal or oor-mount position.
• The charger is designed for use with a detachable power supply cord connected to the normal
household voltage. The power unit is capable of operating at di erent input voltage without user
adjustment.
How to use this charger
1. Properly connect the charging ports of charger and battery.
(Take care not to damage the ports through excessive force.)
2. Insert the power plug of charger into AC socket.
The red LED light indicates the charger is in charging mode.
(If the power plug is inserted into the AC socket without the battery connected to the charger, the
green LED light means it is in normal stand-by mode.)
3. When charging, the LED light will turn green when the battery is fully charged.
When charging has nished, pull out the power plug from the charger, then remove the battery.
AC socket
-
Distribué par Distributed by:
TCED INTL inc.
700, chemin du Grand Bernier Nord
Saint-Jean-sur-Richelieu
(Québec) J2W 2H1
USER'S MANUAL FOR CHARGER
Important safety instructions - save these instructions
Power plug
Battery charger
Charger
Battery
C US
R
LISTED
Phone/Téléphone: 450 348-8720
Toll free/Sans frais: 1 800-661-3330