Publicité
Camera Settings
TIME ZONE: This setting allows you to set your
camera to different time zones.
OPTIONS:
Eastern | Central | Mountain | Pacific |
Alaskan | Hawaiian
TIME FORMAT: This setting is used by the camera to
change the display format for the time in the Info Bar
of the image.
OPTIONS:12 hr | 24 hr
NOTE: If 24 hour format is selected, previous SETUP
TIME will be adjusted and AM/PM will be removed
PIR DELAY: This setting is used to determine how
long the camera will wait before reinitializing
PIR sensor after taking a photo.
OPTIONS: 00m 03s – 59m 59s
CAMERA NAME: This setting is used to adjust
the camera name. Camera name can be up to 13
characters long using alpha (A-Z) numeric (0-9)
characters.
PHOTO RES: This setting will determine the
megapixel (MP) resolution of each image. A higher
MP count will result in better photos and take more
memory space.
OPTIONS: 4MP | 8 MP | 16 MP
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 3 photos
REDUCE BLUR: This setting is used to determine
if the camera should use the MATRIX Blur
technology to dramatically reduce the blur effect,
resulting in clearer night time infrared shots.
OPTIONS:
STANDARD: Minimize blurring effect in
images while retaining long-range night
image capability.
ADVANCED: Enhanced blur reduction
providing a balance between brightness and
image sharpness.
DVR MODE: This setting allows you to
continuously record new images. Turning this
setting ON will continuously delete oldest recorded
files to make space for new files. When turned
OFF, the camera will stop recording new files when
SD card reaches capacity.
OPTIONS: On | Off
TEMPERATURE: This setting is used to change
temperature format on Info Bar.
OPTIONS: Fahrenheit | Celsius
Page 16
Publicité
