Publicité
Software Update Guide
To ensure the product is being utilized to its full potential, we recommend checking
the Stealth Cam COMMAND app for new product updates.
Over-the-Air Upgrade
•
When a software update is ready, your
LEDs will alternate flashing red and
green. Press the SYNC button on your
camera to begin the upgrade.
•
While update is in progress, all 3 LEDs
will flash red. Do not disturb or press
any buttons on the camera while this is
in place.
•
3 solid red lights indicate that the up-
grade is complete. Remove and reinsert
batteries to finish upgrade process.
SD Card Local Upgrade
This method will allow you to upgrade your software without the use of data.
•
Clear all files from your SD card, download software upgrade from
www.stealthcamcommand.com, and insert SD card into camera.
•
Camera will automatically detect new software and begin the process as defined
as above.
•
If camera does not detect new software, remove SD card and verify that the only
file present on your card is the software update file.
Page 13
Publicité
