Publicité
ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
TEST MODE
Power Off State
Special Test Mode
Power On State
(Normal User Mode)
Quick Test Mode
Definition of Quick Test Mode:
- Check operation of all LED's (Verify faulty LED).
- Check model and software version.
- Check different operating modes (e.g. water valve, motor, door, drain pump, etc.).
How to Enter:
- Plug in the unit.
- Press Soil Level Key + Signal Key and Power Key at the same Time.
Important. Once test mode is performed, all data including the diagnostic code saved in the
EEPROM will be erased.
Techsheet-WF350AN-02834A-03_EN.indd 4
WARNING
Test Mode:
Quick Test Mode
Each Test Mode for the Squall is as follows in the
EEPROM Clear
Mode
coming pages. The test modes indicated by the
Continuous Cycle
Mode
red arrows are modes unable to get an access
Service Mode
once the washing cycle has started due to safety
Quick Spin Test Mode
Cycle Count Check Mode
resons.
S/W Version Check Mode
Fast Time Down Test Mode
Demo Mode
Board Input Test Mode
Diagnostic Code
CheckMode
4
2011-09-28
4:00:29
Publicité
