Publicité
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be avoided.
Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about 2 m
around the drill position, so that you can work safely and have immediate access in
case of a failure.
Note:
On the PLB 450.1 G drill rig, the turnstile can be mounted on the carriage on two
different axes.
The upper axis (1) acts directly and the lower axis (2) acts with a 1:3 reduction on
the carriage drive for better feed control.
1
2
16
Publicité
