Publicité
Reverse the door opening direction
1. 1. Set the thermostat to 0 and disconnect the mains plug. Tilt your wine
cabinet 45° backwards and hold it or fasten it firmly.
2. 2. Remove the upper hinge cover.
3. 3. Unscrew the screws of the upper hinge and remove it, then remove the
door.
4. 4. Unscrew the large foot (front right) and remove it.
5. Unscrew the screws of the lower hinge and remove it.
6. 6. Place the bottom hinge on the opposite side after removing the left front
leg, and secure the hinge by tightening the screws.
7. 7. Screw the big foot back on, now on the left side. Also screw the foot on
the right side.
8. Return your wine cellar to an upright position.
28
Publicité
