Rear Panel; Front Panel; Bottom Panel - ION Audio Surf Guide D'utilisation Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Features

Rear Panel

1.
Auxiliary Input: Open the bottom cover to access the USB port.
This stereo 3.5 mm (1/8") input can be used to connect a CD
player, MP3 player, or other audio source.
2.
Micro USB Port: Open the bottom cover to access the USB port.
Use the included USB cable to connect this to a USB port on your
computer or phone charger to recharge Surf's battery.
Note: When the bottom cover is open, the unit will not be water
resistant. Make sure Surf and connections are dry before
charging. Never charge when the unit is wet.

Front Panel

Bluetooth Button: Press and hold this
3.
button to disconnect a paired Bluetooth
device.
4.
Bluetooth
LED:
Bluetooth pairing or illuminates solid
when connected to a Bluetooth device.
5.
Call Receive / Call End / Play /
Pause: Press to play or pause a track
from a connected Bluetooth device.
When
Bluetooth-paired,
release this button to answer a phone
call. The phone's ringtone will be heard
through Surf's speaker until the call is
answered. When the call has been
disconnected, Surf will resume playing
music. To reject an incoming call, press and hold this button.
Power On/Off Switch: Press and hold this button to turn Surf on/off. While Surf is connected to a
6.
power source, it does not need to be powered on to charge the battery.
Note: Surf will power off after 15 minutes if there is a Bluetooth connection but no audio signal is
being received. If there is no Bluetooth device connected, Surf will power off after 2 minutes.
Charging Indicator: The LED will slowly blink when the battery needs charging. The LED is solid red
7.
when the battery is charging. When the power is on and the battery is fully charged, this LED will be
solid green.
Volume Up: Press this to increase the speaker volume on Surf.
8.
Volume Down: Press this to decrease the speaker volume on Surf.
9.
Note: Press the Volume Up and Volume Down buttons at the same time to enable or disable voice
prompts.
10.
Next Track: Press and release this button to skip to the next Bluetooth track. Press and hold this
button for 2 seconds to enable your connected smartphone's voice assistant (e.g. Siri
13
and then speak into the microphone.
Previous Track: Press and release this button once to go to the beginning of the track.
11.
Note: With some apps, pressing the Previous Track button or Next Track button may go to another
playlist or music genre.
12.
Microphone: Talk into this after receiving a call.

Bottom Panel

Tripod Mount: Attach a tripod to this 1/4" (6.35 mm)
13.
threaded mount.
4
This
blinks
when
press
and
AUX IN
7
11
11
4
9
8
3
6
5
12
12
CHARGE
1
2
10
10
®
, Google
®
, etc),
1
2
13
13

Publicité

Table des Matières
loading

Table des Matières