Physical Descriptions; Dip Switches - Abus TVAC22000 Manuel Utilisateur

4. Physical descriptions

Please note:
For the conversion of the HD-SDI signal to HDMI, the format, resolution, and frames per second
are not changed. This means that if a camera supplies a video signal with 1080p and 25 fps, a
monitor that supports this is needed for video display.
All HD-SDI ABUS Security-Center cameras have a resolution of 1920x1080 pixels at 25
1 Voltage supply, 6,0 – 15,0 V DC, DC connector 5,5 x 2,1 mm
2 Status LEDs
3

DIP switches

4 HD-SDI input (BNC connector)
5 HD-SDI output (BNC connector )
6 HD-SDI output (BNC connector )
7
HDMI output
DIP switches
DIP switch assignment 1 – 3, read from left to right.
DIP switch # Naming
1 Re clocking funciton (Re-Clock)
2 LED mode
3 n.u.
frames per second.
1
3
2
6
5
18
4
7
Description
Standard: active ↑
See description for „Status LEDs"
Not used