the desired temperature while reducing your energy consumption. The temperature can
be set between 15 and 35°C. When the temperature is <= 3°C from preset temperature,
product will work on 1st heat setting (1000 W). When the temperature is <=6 °C from
preset temperature, product will work on 2nd heat setting (2000 W).
8. Press
to oscillate the heater from side to side. Press
llation.
9. Press
to turn off the heater. Cold air will continue to blow out for another 30 se-
conds (the display will show the countdown from 30 to 0). This feature protects the hea-
ter and enhances the lifespan of the product.
10. The heater comprises a protection device protecting against overheating. If the fan
heater overheats, a temperature limiting system inside the appliance will automatically
cut the power supply from the heating element while the ventilator continues to function
to cool the appliance. The appliance can re-start as soon as the normal conditions and
temperature needed for it to function are re-established. Identify the causes of this over-
heating to avoid any recurrences.
If the appliance is tilted, a safety system automatically cuts off the power, and the indica-
tor will light off. Put the appliance on a horizontal surface and it will start operating again.
This product is only suitable for well insulated spaces or occasional
use.
Model identifier(s):
Item
Heat output
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
Auxiliary electricity consumption
At nominal heat output
At minimum heat output
In standby mode
Item
Type of heat input, for electric storage local space heaters only (select one)
manual heat charge control with integrated thermostat
manual heat charge control with room and/or outdoor temperature
feedback
electronic heat charge control with room and/or outdoor temperature
feedback
again to turn off the osci-
PERSEI DIGITAL
Symbol
Pnom
1.8-2.0
Pmin
Pmax, c
ELmax
ELmin
ELsb
0.00032
EN
Value
Unit
kW
0.9
kW
2.0
kW
0.000
kW
0.000
kW
kW
Unit
No
No
No
21