Publicité
2
Remove the original end weights and handguards if mounted.
Make sure the handlebar ends and the inside of the handlebars are clear.
Loosely screw the parts indicated with the brackets (5/6) on to the handlebar
ends.
WARNING: Use a liquid threadlocker!
To do so, tighten the screw (7) so that the brackets (5/6) can still be
readjusted.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
5
1
5
×
1
6
×
2
7
×
M
18 Nm
2
8
×
2
9
×
Errors and omissions excepted
Subject to technical and design changes.
Publicité
