Publicité
Cast Setting -
Change casting settings. Settings are listed below:
WiFi Setting:
Setup the WiFi connection for the projector.
Online Update:
Update the projector software version online.
1. Move the on-screen cursor to Online Update and press OK (Ensure
the projector is connected to the network).
2. A firmware upgrade confirmation window will pop up, click
confirm to start the update.
3. The software will be updated automatically.
Note: Please make sure not to power off or try to use the projector until
the update is completed, it will cause damage to the projector.
All current shipments on the market come with the latest firmware, you
don't have to update it. The projector will be reset after the software
updates, all saved settings will be erased.
Restore Factory Default:
Reset the cast software to factory default.
(Clears the WiFi password and/or caches.)
Software Version:
Shows the current casting firmware version.
EN 28
Publicité
