Home Decorators Collection 52-WWDIV Guide D'utilisation Et D'entretien page 9

Assembly - Hanging the Fan
4
Hanging the fan
WARNING: The hook as shown is only to balance the
fan while attaching wiring. Failure to hang as shown
may result in hook breaking, causing the fan to fall.
The hook must pass from inside to the outside of the
canopy.
□
Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
5
Connecting the safety cable
□
Turn the wood screw (LL) (not provided) into the ceiling.
□
Place the looped end of the safety cable (O) onto the wood
screw and then tighten the screw firmly, or connect the safety
cable directly to the outer joist.
Standard mount.
Close to ceiling mount.
XX
LL
O
9
Please contact 1-800-986-3460 for further assistance.
A
B
C
FF
D
A
C
FF
D
A
HOMEDEPOT.CA