Sécurité Et Certifications; Certifications; Déclaration De Conformité Européenne Cem; Déclaration De Conformité Européenne Ped - Ametek Crystal Pressure HPC40 Série Manuel D'utilisation

Sécurité et certifi cations
        

CERTIFICATIONS

Le HPC40 Series a été testé et certifi é comme conforme à plusieurs normes internationales.
Nous déclarons que le HPC40 est conforme à la directive sur la compatibilité électromagnétique et à la directive sur les équipements de pression selon nos déclarations.
CE
Déclaration de conformité européenne CEM
DECLARATION OF CONFORMITY
According to ISO/IEC 17050-1:2010
Manufacturer's Name: Crystal Engineering Corporation
An AMETEK Inc. company
Manufacturer's Address: 708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401 USA
Declares under sole responsibility that the product as originally delivered
Product Name: HPC40 Series Pressure Calibrator
HPC41 Series and HPC42 Series
Model Number:
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking accordingly:
EMC Directive 2004/108/EC
Standard EHSR
EN 55011:2009/A1:2010 (CISPR 11:2009/A:12010) Harmonized
EN 61326-1:2013 Harmonized
And conforms with the following product standards:
Standard Description Class/Criteria
EN 55011:2009/A1:2010 (CISPR 11) Radiated Emissions Class B
EN 61326-1:2013 (EN 61000-4-2) Electrostatic Discharge Criteria A
EN 61326-1:2013 (EN 61000-4-3) Radiated Immunity Criteria B
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications.
The unit complies with all essential requirements of the Directives
USA Signatory: European Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E. David K Porter, P.E. David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company al Engineering Corporation, an AMETEK I AMETEK Denmark A/S
708 Fiero Lane, Suite 9, San Luis Obispo, CA 93401, USA iero Lane, Suite 9, San Luis Obispo, CA 9 Gydevang 32-34, 3450 Allerød, Denmark
+1 805 595 5477 5 595 5477 +45 4816 8000
12 December 2014
Déclaration de conformité européenne PED
Manufacturer's Name:
Manufacturer's Address:
Declares under sole responsibility that the product as originally delivered
Product Name:
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking
accordingly:
Pressure Equipment Directive 97/23/EC
Have been designed and manufactured to the following
Product and Pressure Range
Pressure gauges, calibrators, and
recorders (pressure accessories
per guideline 1/6)
Status EHSR
Pass Harmonized
Pass Harmonized Maximum Allowable Pressure (PS)
Pass Harmonized 200 bar (2 900 psig)
Maximum Allowable Pressure (PS)
> 200 bar (2 900 psig)
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced
specifications. The unit complies with all essential requirements of the Directives.
USA Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company
708 Fiero Lane, Suite 9, San Luis Obispo, CA 93401, USA
+1 805 595 5477
6 April 2015
DECLARATION OF CONFORMITY
According to ISO/IEC 17050-1:2004
Crystal Engineering Corporation
An AMETEK Inc. company
708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401
USA
nVision Series Reference Recorder XP2i Series and XP2i-DD Series Digital Pressure Gauge
nVision Series Lab Reference 30 Series and IS90 Series Pressure Calibrator
CPF Series Fittings and Hoses M1 Series Pressure Gauge
APM Advanced Pressure Module HPC40 Series Pressure Calibrator
Description
The above listed pressure gauges, calibrators and reference recorders are designed
and manufactured in accordance with applicable portions of Annex I, Essential Safety
Requirements, and sound engineering practices. These pressure gauges or calibrators
(classified as pressure accessories per guideline 1/6) have a volume (V) of less than
0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids).
All pressure gauges, calibrators and reference recorders for use on gases or liquids
less than or equal to 200 bar (2 900 psig) are not subject to the essential requirements
of the directive 97/23/EC (PED, Annex I) will be classed as Sound Engineering Practice
(SEP), and shall not have the CE mark applied.
For pressure gauges, calibrators and reference recorders for use on gases or liquids
above 200 bar (2 900 psig) on Class 1 & 2 gases or liquids, Crystal Engineering
maintains a technical file in accordance with Annex III, Module A (internal production
control) when CE mark is required.
Note: CPF Hoses (MPH
series) not for use with Group 1 fluids and gases
European Signatory:
AMETEK Denmark A/S
Gydevang 32-34, 3450 Allerød, Denmark
+45 4816 8000
Sécurité et certifi cations
CE
Mark
No
Yes
Manuel d'utilisation du HPC40 Series

28