Publicité
BUS configuration
Connect the selector to the BUS terminal on the control panel.
The device is set to operate with a 12/24 V power supply by default. To switch to BUS
mode, set DIP-switches 1, 2 and 3 as shown in the fi gure.
Do not use a shielded cable.
Up to 7 BUS selectors can be connected (keypad, transponder, Bluetooth or key).
If there are multiple BUS selectors connected in the system, set a diff erent address for each
selector using DIPs 1 2 3.
If two selectors have the same address on the BUS, the backlighting fl ashes red to
highlight the confi guration error.
Backlighting
Set DIP 4 to ON to activate the selector backlighting.
When the device is in standby mode, the backlighting is blue.
F
Final operations
Confi guration
Use the AutomationBT app to confi gure the device.
The app is available for Android and iOS and can be downloaded from the Google Play Store and
Apple Store respectively.
Operation with 12/24 V power supply
When a command is sent from the app, the device backlighting lights up green.
10
Status warning LED
Status
Colour
Message
On
Blue
The device is communicating with a smartphone.
Off
Blue
The device is not connected, powered or confi gured. Check the DIP-
switch settings.
Flashing
Blue
Device confi gured and powered correctly.
BUS mode operation
When the device receives a command, the backlighting lights up yellow. When the command
starts, the device backlighting lights up green.
If the operator requires maintenance, the selector fl ashes 6 times in the colour set under the
[Signal maintenance] function on the control panel.
You need to activate the [Confi gure maintenance] function on the control panel.
Please see the operator or control panel manual for more information.
10
Status warning LED
Status
Colour
Message
On
Blue
The device is communicating with a smartphone.
Off
Blue
The device is not communicating with a smartphone.
Quick
Red
The device is confi gured and communicating with the BUS.
fl ash
On
Red
The device is powered but not communicating with the BUS.
8 - FA01973M4A - 06/2023 © CAME S.p.A.
Publicité
