Télécharger Imprimer la page

CAME 806SL-0340 Manuel D'utilisation page 7

Publicité

Description
806SL-0340
SELB1NDG1 - Outdoor BUS Bluetooth selector for 15 users with blue backlighting, also suitable
for use with operators without BUS technology.
806SL-0350
SELB1NDG2 - Outdoor BUS Bluetooth selector for 50 users with blue backlighting, also suitable
for use with operators without BUS technology.
806SL-0360
SELB1NDG3 - Outdoor BUS Bluetooth selector for 250 users with blue backlighting, also suitable
for use with operators without BUS technology.
Technical data
MODELS
Power supply (V - 50/60 Hz)
BUS connection (CXN Unit)
Power (W)
Absorbed current (mA)
Operating temperature (°C)
Storage temperature (°C)*
Protection rating (IP)
Bluetooth radio frequency (GHz)
Bluetooth transmission power
(dBm)
Number of users
Insulation class
Average life (cycles)**
(*) Before installing the product, keep it at room temperature where it has previously been
stored or transported at a very high or very low temperature.
(**) The average product life is a purely indicative estimate. It applies to compliant usage,
installation and maintenance conditions. It is also infl uenced by other factors, such as
climatic and environmental conditions.
7 - FA01973M4A - 06/2023 © CAME S.p.A.
SELB1NDG1
SELB1NDG2
12 - 24 AC - DC
12 - 24 AC - DC
2
2
0.75
0.75
65
65
-20 ÷ +55
-20 ÷ +55
-25 ÷ +70
-25 ÷ +70
54
54
2,4
2,4
9
9
15
50
III
III
500000
500000
Description of parts
1
Front cover
2
Bluetooth module
3
PIN label
4
Control board
B
Control board
9
Set-up DIP switch
10
Status warning LED
11
Terminal block for relay connection
12
BUS terminal board and 12/24V power supply
SELB1NDG3
C
Size
12 - 24 AC - DC
D
2
Installation
0.75
Connections and settings
65
-20 ÷ +55
For systems with more than one selector, please check the control panel or operator
-25 ÷ +70
manual for information on the diff erent types of wiring.
54
Configuration with 12/24V power supply and relay output
2,4
Connect the selector to terminals 2-3 on the control panel.
9
We recommend using a FROR 4x0.5 mm² cable, maximum length from the control
board: 30 m.
250
Set DIP 1 2 3 to OFF.
III
We recommend using a FROR 2x1mm² cable, maximum length from the control
500000
board: 50 m.
A
5
Front frame
6
External gasket
7
External casing
8
Rubber gasket
E

Publicité

loading

Ce manuel est également adapté pour:

806sl-0350806sl-0360Selb1ndg1Selb1ndg2Selb1ndg3