Télécharger Imprimer la page

Imetec N9901 Mode D'emploi page 15

Publicité

on a smooth and heat resistant surface.
While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
Leave the plates to cool down completely when finished, before
putting the appliance away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
PREPARING YOUR HAIR
Wash hair as normal and comb to remove knots.
Dry your hair and brush from the roots to the ends.
INSTRUCTIONS FOR USE
Connect the power cable (6) to the mains.
Turn the hair straightener on by pressing the On/Off key (4)
Select the desired temperature between 150°C and 230°C,
depending on the type of hair and the desired effect; the
temperature can be adjusted at any time by pressing + or - (2);
The selected temperature will start flashing until it is reached,
and then appear steady on the display.
If you wish, it is possible to block the selected temperature to
avoid accidentally changing it during use. To do so, hold the +
key down for a few seconds (2). The lock icon will light up. To
unlock the temperature, repeat the same operation; the lock icon
will disappear.
Take a thin lock of hair, the same width as the plate and place it
between the two plates.
Keep the lock of hair taut with one hand and, with the other hand,
slide the closed plate from the roots down to the ends.
When you are finished styling your hair, turn the straightener off
by holding down the On/Off button (4) for a couple of seconds.
USE
13
EN

Publicité

loading