Publicité
8. Attach the range hood assembly to the lower vertical
supports with 2 leveling screws and 2 nuts.
D
A. 2 - Leveling screws
B. Lower vertical support
C. Place leveling screws
through the structure
D. Nut
9. Install the 4 lower vertical supports with 16 - 4.2x8 mm
screws. Make sure all screws are securely tightened
A
B
A. 4 - Lower vertical supports
B. 16 - 4.2 x 8 mm screws
Disconnect power before servicing.
Replace all parts and panels before operating.
A
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Remove terminal box cover.
3. Remove the knockout in the terminal box, and then install a
B
UL listed or CSA approved 1/2" (12.7 mm) strain relief.
C
Make Electrical Connection
WARNING
Electrical Shock Hazard
A. Knockout
B. Terminal box
C. Terminal box cover
A
B
C
9
Publicité
