Cooktop Installation - Blomberg CTE 30400 Instructions D'installation

Excessive Weight Hazard
x
Use two or more people to move and install
cooktop.
Failure to do so can result in back or other injury.
Cut Hazard
x
Beware of sharp edges. Use the polystyrene ends
when carrying the product. Failure to use caution
could result in minor injury or cuts.
Always consult the countertop manufacturer for
x
specific instructions.
Ensure the countertop is square and level and
x
ensure no structural members interfere with space
requirements.
Prepare the cut-out according to the instructions
x
(see cut-out dimensions).
Make sure the wall coverings, countertop and
x
cabinets around the cooktop can withstand heat
(up to 200 °F / 93 °C).
Figure 4. Tools you will need
6

Cooktop Installation

WARNING
Step 1
Remove packaging materials and literature package
from the cooktop before beginning installation.
Remove Installation Manual from literature pack and
read them carefully before you begin.
MANUAL
GASKET
SCRAPER
Figure 5. Parts
Step 2
Place a towel or table cloth onto the counter top. Lay
the cooktop upside down onto the protected surface.
Figure 6.
Installation Manual
ENGLISH
TOP-CARDBOARD
TOP PACKAGING
COOKTOP
BOTTOM PACKAGING
CARDBOARD