Publicité
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
V
Volts
A
Amperes
Hz
Hertz
W
Watts
Alternating Current
no
No Load Speed
.../min
Per minute
Class II
Construction
Safety Alert
Read the user's
manual
Eye protection
Wet Conditions
Alert
Keep bystanders
away
Risk of Injection
Risk of Explosion
Kickback
Electric Shock
Chemical Burns
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Type of current
Rational speed, at no load
Revolutions, strokes, surface speed, orbits, etc., per
minute
Double-insulated construction.
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand user's
manual before using this product.
Wear eye protection when operating this equipment.
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must keep all bystanders at least 49
ft (15 m) away.
To reduce the risk of injection or injury, never direct a water stream
towards people or pets or place any body part in the stream. Leaking
hoses and fittings are also capable of causing injection injury.
Do not hold hoses or fittings.
Do not spray flammable liquids. Flammable liquids and their vapors
are explosive and can cause severe burns or death.
To reduce the risk of injury from kickback, hold the spray wand
securely with both hands when the machine is on.
Do not use near electric power lines or receptacle outlets.
To reduce the risk of injury or damage, DO NOT USE ACIDS,
ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE
MATERIAL, OR INDUSTRIAL GRADE SOLUTIONS in this
product.
7
Publicité
