Publicité
7.0 POSSIBILIBIES OF FAILURE
1 Compressor does not run at starting pressure:
* blown fuse
* tank at pressure
* motor broken
* defective pressure switch
2 Repeating thermal failure:
* loose wire
* pressure switch does not releave
air circuit
* too low voltage
* overloading
3 Compressor keeps blowing off air:
* defective non-return valve
4 Too little air production:
* dirty air filter
* defective valves
5 Leaking safety valve:
* pressure too high
* defective safety valve
8.0 TECHNICAL DETAILS
Type
Order number
Number of cylinders
Number of stages
Motorpower
Volt
Air tank
Operating pressure
Maximum pressure
Sound pressure level
Air intake capacity
Protected with
Service
Weight
Dimensions (lxwxh) (mm)
Model changes reserved.
All compressors are provided with Euro-Norm (CE-Choice)
- renew the fuse
- discharge
- repair/renew
- repair/renew
- repair
- repair/renew valve
- remove extension cable or use heavier
- reduce loading
- repair/renew
- clean/renew filter
- renew
- set pressure switch
- renew
HL 275/50
36856
1
1
2 Hp/1,5 kW
230 V/50 Hz
50 litres
6 bar
8 bar
78 dB(A)
275 l/min.
16 amp.
30%-60 min.
32 kg
760x330x715
22
Publicité
