Publicité
ASSEMBLY
List of parts
Backrest • Seat with a LP11 mechanism • Base • Headrest • Armrests R10 or R11
Mounting kit: Actuator • Castors • Screws M6x30 mm – 6 pcs. for R10 armrest or
M6x25 mm - 6 pcs. and M8 washers - 4 psc. for R11 armrest • M10x50 mm conical
screws – 2 pcs. • Allen key „L" 6" and 4"
1.
4.
1.
Push the wheels to the base of the chair.
2.
Insert the pneumatic jack into the hole of the chair base.
R10 Armrest - Screw the armrests using M6x30 mm screws.
3.
R11 Armrest - Screw the armrests using M6x25 mm screws and M8 washers.
4.
Screw the backrest to the mechanism already in the seat using two
M10x50 mm screws.
5.
Place the seat with the backrest and armrests screwed on the cylinder
which is already in the base equipped with castors.
6.
Slide the headrest into the screwed handle.
2.
5.
3.
6.
BS HD
VERSION
EN
EN
1
Publicité
